Schmidt Stratos B30-21 Wec Nido 3m3 automatisk sprede-automat / 3m3 automatic Spreader, year 2017

3m3 spreader - Very nice - has only been standby and never used.

1 piece. NIDO STRATOS MODEL B30-21 WEC SPREAD AUTOMATIC
Model with EC control
Fully automatic speed synchronization.
Spreading width: 2-12 meters
Quantity: 5-40 g / m²
Salt container: 3.0 m³
Basic frame length: 2.430 mm
Fully hydraulic transmission with hydraulic operation.
Remote control doubling of set spread rate.
Volume counter (per emergency kg, L + total kg. L, H).
Remote control setting of spreading symmetry.
Control box 12/24 volt, gas spring for plate suspension.

1 piece. FRAME EXTENSION +600 mm

1 piece. PRESENCE

1 piece. NET FOR CONTAINER 40 X 40 MM

1 piece. DRIVE OF VEHICLE HYDRAULICS

1 set of WETTING SYSTEMS
Humidifier consisting of 1,210 ltr.
Side fluid tank (s), pump and control valve.
Fully automatic speed synchronization,
Spread width, liquid and dry salt content.
C connection for filling liquid.
By spreading moistened salt automatic reduction
of the spreading disc speed, then set
spreading width is maintained, as well as 30% reduction
of the amount of dry salt.
Additional specifications cont. Page 2.

1 piece. ES CONTROL
With the ES control, the latest technology has been used
Within the spreading control system area, this enables
including the following:
• New programmable control box with dual function in each of 2 rotary knobs so that spreading width and spreading symmetry (spreading pattern setting) are adjusted simultaneously when spreading to the left and right, respectively.
Possibility to choose the humidification percentage on the box.
Possibility to pre-program various spreading settings, including setting intervals for both width, dosage and humidity percentage.

To relieve and help the driver, the functions spreading symmetry and spreading width are combined in a rotary knob e.g. in the event of a short-term spread at a bus stop or an additional carriageway, only a rotary knob must be operated.

Electronic control that constantly monitors and adjusts the machine to maximum accuracy.
Automatic transition to emergency program in the event of a malfunction, as well as a signal to the driver on the control box.

The ES spreader control box is equipped with a volume counter, which shows the consumption of dry matter and liquid at each turn, as well as the total number of kg, liters and hours. The control box can be programmed with several densities corresponding to the properties and grain size of different spreading materials. When changing the spreading material which takes place on the control box, the speed of the spreading disc automatically adapts to the properties of the material, so that the entered spreading pattern and dosage are maintained.

Both the control box and the circuit board communicate via
CAN-BUS system (standardized communication system within the vehicle industry). All information is sent via two cable poles. This means thin / flexible cable between spreader and control box.

The spreader / box is prepared for data transfer to e.g. Winterman, GPS registration and GPS controlled spread.

1 piece. HOLDER FOR CONTROL BOX

1 piece. NODO 5-ZONE PREMIUM 660 MM SPREADING PLATES:
With the 5-Z mixing system, the optimal mixture of dry matter and liquid for humidified sales is achieved. Dry matter and liquid are mixed five times before it leaves the spreading disc, with this you get a more precise and delimited spreading pattern / width. (2-12m). At the same time, impacts from side and speed winds are significantly reduced.

1 piece. WORK LAMP - VISUAL SPREAD CONTROL (WHITE)

1 piece. INFRARED SPREAD INDICATOR

2 pcs. ROTORBLINK
Mounted on the back of the spreader

1 piece. CAB GENERATION FOR CAB

1 piece. FILLING STOP

1 piece. CHANGE FRAME (FOR WIRE AND HOOK LIFT)

1 piece. GPRS MODULE
For transferring data from spreader to Vinterman.

1 piece. AUTOLOGIC GPS CONTROLLED SPREAD